Techlite Corp

The Mc Girr MG24 range of machines is aimed extensively at the export market. This compact, all purpose, user friendly machine has been adapted to suit each environment from all corners of the globe. From solids to cavity to the very specialised insulated concrete block, the Mc Girr MG24 can do it all.

• Semi-Automatic operation with preset facility for travel and mould vibration
• Electric-Hydraulic 380/400 Volt, 50 Hz, 3-phase power requirement
• Hydrostatic transmission with individual high torque hydraulic motor on each drive wheel at the rear of machine
• Large capacity feedtray with filler rake – one filling is sufficient for any mould
• Double action Tamper Head gives better product compaction, therefore higher product density and more positive demoulding
• Typical cycle time 27 – 32 seconds, for cavity and solid block,
• Product height range 180mm – 300mm
• Maximum mould area 1300mm x 950mm
• Safety guards all round incorporating captive key safety locking system
• Adaptation for the production of insulated blocks can be easily removed from the main body of the machine to facilitate mould changing
• One full set of heavy duty, high frequency, and interchangeable, variable amplitude mould vibrators, comprising 4 no. Vibrator elements with individual motors, mounting plates, cables and plugs
• Hopper capacity 1.75m3
• Capable of manufacturing up to 1,400 8 inch hollow blocks per hour
• Capable of manufacturing up to 2,800 4 inch solid blocks per hour

1. The latest addition to the block handling equipment is the new Strap and Stack machine. The machine was produced in 2004 as a world first. Today there are many of the machines working and reducing the running costs of a concrete block factory. The remote controlled Strap and Stack can hanlde upto 50,000 blocks during a standard working day on approimately 4 gallon of diesel.

   • Fully automatic Strap and Stack machine – no operator required
   • Programmed to suit blockyard – stacks up to 4 bales high and 4/6/8 bales of Hollow blocks.
   • Significant time saved – straps and stacks one bale of blocks in approx 20 seconds
   • Electrics are controlled by Mitsubushi PLC Control
   • Machine powered by three cylinder Deutz air cooled generator
   • Safety guards all round incorporating captive key safety locking system
   • Choice of strapping heads from two major manufacurers
   • Optional extras include – Automatic greasing system & Compressor
   • Leaves forklift operator free to load blocks onto lorry or stockpile

Additional Information:

• Item Code: MK24
• Production Capacity: 10000 TO 20000 Per Shift
• Delivery Time: 12 Weeks

Multilevel Masterblock MKII
Download Product Brochure

The excellent characteristics of the Multilevel Masterblock  make it one of the most desirable and versatile block producing machines available. Its innovative design enables the machine to manufacture all types of blocks, bricks and hollow blocks in all corners of the world  . The Multilevel Masterblock is the ideal concrete block machine for economical mass production of high quality concrete blocks.

• Electronic/Hydraulic – 380-400 Volt Phase, 50 Hz
• Diesel/Electric/Hydraulic powered via on board 4cyl. diesel/50kva
• Fully automatic machine with pre-programmed Mitsubis control
• Automatic in-row steering, via ultrasonic guidance system
• Hard-wired remote control unit for added safety in mould changing
• Unique easy-fit mould box. No need for entry into the danger area
• New hydraulically clamped, quick fit tamper head carriage
• New type Powered feedray
• Bottom section of hopper detachable for easier replacement
• Pre-wired with 2 no. plug sockets for tamper head vibrator units
• Maximum mould area is 1160mm x 914mm
• Cycle Time is typically 25-30seconds depending on application
• Product height range 190mm – 450mm
• Safety guards all round with captive key locking system
• Factory fitted options, Auto lubrication for all grease points
• Hopper capacity 3.7m3 max
• Produces Solid and Hollow Blocks
• Additonal swingarms on mould carriage for stability.
• Capable of 4400, 100x215x440mm Solid blocks per hour
• Capable of 1200, 200x200x400mm Hollow blocks per hour

 

1. We are a unique entity in the industry, actively committed towards providing a qualitative range of Semi Automatic Hollow Block Making Machine
2. Can produce hollow blocks upto 2000 per hour.
3. Semi automatic block machine.
4. With less man-power.
5. Easy to operate.
6. Less power consumption.

Additional Information:

• Item Code: MG24
• Production Capacity: 5000 to 10000
• Delivery Time: 12 Weeks

The Mc Girr MG24 range of machines is aimed extensively at the export market. This compact, all purpose, user friendly machine has been adapted to suit each environment from all corners of the globe. From solids to cavity to the very specialised insulated concrete block, the Mc Girr MG24 can do it all.

• Semi-Automatic operation with preset facility for travel and mould vibration
• Electric-Hydraulic 380/400 Volt, 50 Hz, 3-phase power requirement
• Hydrostatic transmission with individual high torque hydraulic motor on each drive wheel at the rear of machine
• Large capacity feedtray with filler rake – one filling is sufficient for any mould
• Double action Tamper Head gives better product compaction, therefore higher product density and more positive demoulding
• Typical cycle time 27 – 32 seconds, for cavity and solid block,
• Product height range 180mm – 300mm
• Maximum mould area 1300mm x 950mm
• Safety guards all round incorporating captive key safety locking system
• Adaptation for the production of insulated blocks can be easily removed from the main body of the machine to facilitate mould changing
• One full set of heavy duty, high frequency, and interchangeable, variable amplitude mould vibrators, comprising 4 no. Vibrator elements with individual motors, mounting plates, cables and plugs
• Hopper capacity 1.75m3
• Capable of manufacturing up to 1,400 8 inch hollow blocks per hour
• Capable of manufacturing up to 2,800 4 inch solid blocks per hour

Additional Information:

• Delivery Time: 12 Weeks

Multilevel Masterblock MKII
Download Product Brochure

The excellent characteristics of the Multilevel Masterblock  make it one of the most desirable and versatile block producing machines available. Its innovative design enables the machine to manufacture all types of blocks, bricks and hollow blocks in all corners of the world  . The Multilevel Masterblock is the ideal concrete block machine for economical mass production of high quality concrete blocks.

• Electronic/Hydraulic – 380-400 Volt Phase, 50 Hz
• Diesel/Electric/Hydraulic powered via on board 4cyl. diesel/50kva
• Fully automatic machine with pre-programmed Mitsubis control
• Automatic in-row steering, via ultrasonic guidance system
• Hard-wired remote control unit for added safety in mould changing
• Unique easy-fit mould box. No need for entry into the danger area
• New hydraulically clamped, quick fit tamper head carriage
• New type Powered feedray
• Bottom section of hopper detachable for easier replacement
• Pre-wired with 2 no. plug sockets for tamper head vibrator units
• Maximum mould area is 1160mm x 914mm
• Cycle Time is typically 25-30seconds depending on application
• Product height range 190mm – 450mm
• Safety guards all round with captive key locking system
• Factory fitted options, Auto lubrication for all grease points
• Hopper capacity 3.7m3 max
• Produces Solid and Hollow Blocks
• Additonal swingarms on mould carriage for stability.
• Capable of 4400, 100x215x440mm Solid blocks per hour
• Capable of 1200, 200x200x400mm Hollow blocks per hour

 

RT 3 Concrete Block Making Machine is one of our builder series machine and has been widely accepted by concrete brick & block manufacturer. From this Concrete Block Making Machine you can make Concrete Blocks, Fly ash Bricks, Cement Bricks, Interlocking Pavers, Solid Blocks, Colored Paver Blocks. This Concrete Block Making Machine makes 2400 Bricks/Hour, 3360 Solid Block/Hour, 2400 Interlocking Paver Block/Hour. Operating cycle of this machine is 14-20/s and pallet size is 600×200 mm.

You can use this Concrete Block Making Machine for multiple type of brick & block making. These machines are made in India with robust construction with perfect finish product output.

Additional Information:

• Production Capacity: 500 Blocks to 2000 Blocks per hour
• Delivery Time: 4 to 6 weeks

Keeping the diverse requirements of customers in mind, we are instrumental in providing Hollow Block Making Machine.

Additional Information:

• Delivery Time: 2 months

RT 4 Concrete Block Making Machine is one of our builder series products and has been widely accepted by Concrete Block & Brick Manufacturer. From this Concrete Block Making Machine you can make Concrete Blocks, Fly ash Bricks, Cement Bricks, Interlocking Pavers, Solid Blocks, Colored Paver Blocks. This Concrete Block Making Machine makes 2880 Bricks/Hour, 4320 Solid Block/Hour, 2880 Interlocking Paver Block/Hour, 1260 Hollow Blocks/Hour. Operating cycle of this machine is 15-30/s and pallet size is 900×550 mm.

You can use this Concrete Block Making Machine use for multiple type Block & Brick making. These machines are made in India with robust construction with perfect finish product output.

Additional Information:

• Delivery Time: 45 to 60 days

Keeping the diverse requirements of customers in mind, we are instrumental in providing Concrete Paver Block Machine.

RT 3 Concrete Block Making Machine is one of our builder series machine and has been widely accepted by concrete brick & block manufacturer. From this Concrete Block Making Machine you can make Concrete Blocks, Fly ash Bricks, Cement Bricks, Interlocking Pavers, Solid Blocks, Colored Paver Blocks. This Concrete Block Making Machine makes 2400 Bricks/Hour, 3360 Solid Block/Hour, 2400 Interlocking Paver Block/Hour. Operating cycle of this machine is 14-20/s and pallet size is 600×200 mm.

You can use this Concrete Block Making Machine for multiple type of brick & block making. These machines are made in India with robust construction with perfect finish product output.

Additional Information:

• Delivery Time: 60 days

RT 4 Concrete Block Making Machine is one of our builder series products and has been widely accepted by Concrete Block & Brick Manufacturer. From this Concrete Block Making Machine you can make Concrete Blocks, Fly ash Bricks, Cement Bricks, Interlocking Pavers, Solid Blocks, Colored Paver Blocks. This Concrete Block Making Machine makes 2880 Bricks/Hour, 4320 Solid Block/Hour, 2880 Interlocking Paver Block/Hour, 1260 Hollow Blocks/Hour. Operating cycle of this machine is 15-30/s and pallet size is 900×550 mm.

You can use this Concrete Block Making Machine use for multiple type Block & Brick making. These machines are made in India with robust construction with perfect finish product output.

Additional Information:

• Production Capacity: 750 - 1500 Blocks, 2500 Bricks
• Delivery Time: 60 Days

Overview

RT 4 Concrete Block Making Machine is one of our builder series products and has been widely accepted by Concrete Block & Brick Manufacturer. From this Concrete Block Making Machine you can make Concrete Blocks, Fly ash Bricks, Cement Bricks, Interlocking Pavers, Solid Blocks, Colored Paver Blocks. This Concrete Block Making Machine makes 2880 Bricks/Hour, 4320 Solid Block/Hour, 2880 Interlocking Paver Block/Hour, 1260 Hollow Blocks/Hour. Operating cycle of this machine is 15-30/s and pallet size is 900×550 mm.

You can use this Concrete Block Making Machine use for multiple type Block & Brick making. These machines are made in India with robust construction with perfect finish product output.

Additional Information:

• Production Capacity: 1500 Blocks per hour
• Delivery Time: 60 days

Composite wood production pallet

Cost: 1600/- Rs and above per piece

Minimum order: 500 pieces 

Additional Information:

• Delivery Time: 10 to 30 days

The Mc Girr MG24 range of machines is aimed extensively at the export market. This compact, all purpose, user friendly machine has been adapted to suit each environment from all corners of the globe. From solids to cavity to the very specialised insulated concrete block, the Mc Girr MG24 can do it all.

• Semi-Automatic operation with preset facility for travel and mould vibration
• Electric-Hydraulic 380/400 Volt, 50 Hz, 3-phase power requirement
• Hydrostatic transmission with individual high torque hydraulic motor on each drive wheel at the rear of machine
• Large capacity feedtray with filler rake – one filling is sufficient for any mould
• Double action Tamper Head gives better product compaction, therefore higher product density and more positive demoulding
• Typical cycle time 27 – 32 seconds, for cavity and solid block,
• Product height range 180mm – 300mm
• Maximum mould area 1300mm x 950mm
• Safety guards all round incorporating captive key safety locking system
• Adaptation for the production of insulated blocks can be easily removed from the main body of the machine to facilitate mould changing
• One full set of heavy duty, high frequency, and interchangeable, variable amplitude mould vibrators, comprising 4 no. Vibrator elements with individual motors, mounting plates, cables and plugs
• Hopper capacity 1.75m3
• Capable of manufacturing up to 1,400 8 inch hollow blocks per hour
• Capable of manufacturing up to 2,800 4 inch solid blocks per hour

The latest addition to the block handling equipment is the new Strap and Stack machine. The machine was produced in 2004 as a world first. Today there are many of the machines working and reducing the running costs of a concrete block factory. The remote controlled Strap and Stack can hanlde upto 50,000 blocks during a standard working day on approimately 4 gallon of diesel.

• Fully automatic Strap and Stack machine – no operator required
• Programmed to suit blockyard – stacks up to 4 bales high and 4/6/8 bales of Hollow blocks.
• Significant time saved – straps and stacks one bale of blocks in approx 20 seconds
• Electrics are controlled by Mitsubushi PLC Control
• Machine powered by three cylinder Deutz air cooled generator
• Safety guards all round incorporating captive key safety locking system
• Choice of strapping heads from two major manufacurers
• Optional extras include – Automatic greasing system & Compressor
• Leaves forklift operator free to load blocks onto lorry or stockpile

Additional Information:

• Delivery Time: 12 Weeks

RT 6 Concrete Block Making Machine is one of our builder series products and has been widely accepted by Block & Brick Manufacturer. From this Concrete Block Making Machine you can make Concrete Blocks, Fly ash Bricks, Cement Bricks, Interlocking Pavers, Solid Blocks, Colored Paver Blocks. This Concrete Block Making Machine makes 3600 Bricks/Hour, 5040 Solid Block/Hour, 3600 Interlocking Paver Block/Hour, 1800 Hollow Blocks/Hour. Operating cycle of this machine is 15-25/s and pallet size is 900×700 mm. From this block making machine you can make multiple types of bricks and blocks.

Additional Information:

• Delivery Time: 60 days

Recycled Plastic Pallets
Cost per piece: 750/- to 1500/- (Cost varies depending on the sizes of the pallets)

Minimum order:500 pieces for Brick and Block making machines